Ubiquiti | Airmax Antenna | LTU-Pro | Ubiquiti Point-to-MultiPoint (PtMP) 5GHz, Up To 25km, 24 dBi Antenna, Functions in a PtMP Environment w/ LTU-Rocket as Base Station

Featuring an integrated 24 dBi dish antenna, the LTU Pro is a 5 GHz subscriber station that functions as a CPE (Customer Premises Equipment) in a Point‑to‑MultiPoint (PtMP) environment with the LTU Rocket® as the basestation.

Based on Ubiquiti’s LTU technology, the LTU Pro is not impeded by the limitations of standard 802.11 Wi‑Fi technology. Its custom LTU silicon and radio architecture provide up to 600+ Mbps¹ of real TCP/IP throughput and modulation rates of up to 4096QAM².

The LTU Pro supports both bridged and built‑in hardware NAT router modes to suit your specific deployment.

The LTU Pro can use different frequencies for TX and RX to avoid interference.

The LTU Pro is designed for quick yet reliable mounting on a pole. It features a built‑in mechanical tilt; the mounting bracket allows convenient adjustments to the elevation with a range of        ± 15°.

^{1 1+ Gbps with future firmware upgrade.} 

^{2 Available with future firmware upgrade.}

• PtMP CPE
• 1024 QAM
• 10/20/30/40/50 MHz channel bandwidth
• Central configuration management from AP side
• Frequency split
• Automatic power adjustments
• Router mode support
• Functions in a PtMP environment with the LTU-Rocket as the basestation

• Dimensions: 316.5 x 316.5 x 174.3 mm
• Weight: 1.3 kg  
• Weight with Mount: 1.735 kg 
• Networking Interface: (1) 10/100/1000 Ethernet Port
• Enclosure: Outdoor UV Stabilized Plastic
• Max Power Consumption: 9W
• Power Supply: 24V, 0.5A Gigabit PoE Adapter (Included)
• Power Method: 24V Passive PoE (Pairs 4, 5+; 7, 8‑)
• Voltage Range: 22 - 26V
• Max. Conducted TX Power: 22 dBm (per Chain)
• Gain: 24 dBi
• Beamwidth: 14°
• Sidelobe Level: ‑10 dB
• Front‑to‑Back Ratio: 27 dB
• Mounting: Pole-Mount (Kit Included)
• Wind Loading: 150 N @ 200 km/h (33.72 lbf @ 125 mph)
• Wind Survivability: 200 km/h (125 mph)
• ESD/EMP Protection: ± 24kV Contact/Air
• Operating Temperature: -40 to 60° C
• Operating Humidity: 10 to 95% Noncondensing
• Certifications: CE, FCC, IC

1-year limited warranty